ODROID-HC4-P KIT consists of an ODROID-HC4 board, a case made of rigid PCB which you can mount two 3.5-inch HDDs horizontally in, and includes a cooling fan.
It’s a network storage device that you can build for yourself, and the existing HC4’s Petitboot function and the latest OS versions are supported and can be used without any changes.
A | CPU (Amlogic S905X3) | H | 2x System LED indicators |
---|---|---|---|
B | DDR4 memory (4GiB) | I | 1x UART for system console |
C | 2x SATA ports | J | 1x IR receiver |
D | 1x RJ45 Ethernet port (10/100/1000) | K | 5x GPIO pins (for optional OLED display) |
E | 1x HDMI 2.0 | L | 1x Micro SD slot |
F | 1x USB 2.0 host port | M | 1x Cooling fan |
G | 1x DC power jack (Outer diameter : 5.5mm, inner diameter 2.1mm) | N | 1x Boot switch |
Software Support
Petitboot can find the OS on an SD card, the HDD or the SSD. Even if you do not have an SD card but you have a plugged-in HDD or SSD that has an OS installed, Petitboot will fiond and boot the HC4 using the OS from the HDD or SSD. Debian/Ubuntu OS can run with either Hardkernel’s preinstalled OS image, or Debian/Ubuntu Netboot Installer - which you can obtain from the ODROID forum.
Supported Linux kernel versions:-
4.9.230 or newer (Hardkernel stock OS version)
Mainline kernel 5.15 or newer (Unofficial version from ODROID forum)
Specification
FORM FACTOR | Board Dimensions: 84mm x 90.5mm x 25.0mm Transformation KIT Dimensions : 225mm x 106mm x 127mm Weight: 615g including board and transformation KIT without HDD |
---|---|
PROCESSOR | Amlogic S905X3 Processor L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.800GHz) ARMv8-A architecture with Neon and Crypto extensions Mali-G31 MP2 GPU with 4 x Execution Engines (650Mhz) |
MEMORY | DDR4 4GiB with 32-bit bus width Data rate: 2640 MT/s (PC4-21333 grade) 1.2Volt low power design |
STORAGE | 1x Micro SD slot (DS/HS mode up to UHS-I SDR104) |
NETWORKING | 1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) – Realtek RTL8211F (Ethernet transceiver) – LED indicators * Green LED: Flashing by data traffics at 100Mbps connection * Amber LED: Flashing by data traffics at 1000Mbps connection |
VIDEO | 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) |
AUDIO | 1 x HDMI digital output |
COOLER | Passive heatsink ( 40x32x10 mm ) on the CPU of PCB board Bearing : Hydraulic Bearing FAN – Rated Voltage : 5V – Rated Current : 0.2A – Max Speed RPM : 2000RPM – Air Flow CFM : 33 – Air Pressure (In H2O) : 0.08 – Noise Level(dBA) : 26.5 – Dimension : 92X92X25MM – Wire & Connector : 150mm, 4pin 1.25mm pitch |
EXTERNAL I/O | 1 x USB 2.0 host port 1 x Debug serial console (UART) 2 x SATA Connectors |
OTHER FEATURES | IR receiver for remote controller System LED Indicators: – Red (POWER) – Solid light when DC power is connected – Blue (ALIVE) – Flashing like heartbeat while Kernel is running. |
POWER | 1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm DC input : 14.5V ~ 15.5V – DC 15V/4A power adaptor is recommended. Sold separately. Power consumption with two ST2000DM006 HDDs : – IDLE(with HDD in spin-down) : ≃ 5.88W – Active(using SAMBA): ≃ 15.59W – Suspend: ≃ 0.29W |
Odroid HC4-P Kit [90000]
- Brand: Hard Kernel
- Product Code: Odroid HC4-P Kit
- Availability: In Stock
-
128.33€
- Ex Tax: 106.94€