This “Case Type 4” is designed for the user who needs high a performance network machine, but with a lower storage requirement than the Type 1 Case.


The Odroid H2 board has a fanless design - and this case is designed with two 92mm cooling holes at the top of the case  - one to exhaust the heat from the processor, the other too exhaust heat from Hard Drives.


For extra cooling you also can install 92mm x 92mm standard PC cooling fans into these exhaust holes if larger processing is being used / more heat is being generated.

Supported Storage:


Owing to the physical limitation of the design, only the below combination of the storage drives are supported.


On-board eMMC 5.1 module

On-board M.2 NVMe (NGFF-2280)


Up to 1 x 3.5” SATA HDD or SSD

Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)


“SATA Data and Power Cable” must be purchased

The disk drive mounting screws (M3x6mm and #6-32x6mm) are included in the package.

The power and reset switches are accessible through the hole at the front

Optional power on/off switch (diameter 16mm) can be installed at the front


Dimensions:

209 (L) x 132 (W) x 106 (H) mm

 

Package Contents:




A. Rear-top panel

B. Front panel

C. Rear-back panel

D. Rear panel

E. Front space filler

F. Bottom panel

G. 2.5”/3.5” inner drive bracket

H. Left panel

I. Right panel

J. Top panel

K. 1 x 92mm stainless cooling fan grill for front-top

L. 1 x 92mm stainless cooling fan grill for rear-top

M. 6 x 40mm (F) PCB Supports

N. 3 x 40mm (M) PCB Supports

O. 4 x 15mm (M) PCB Supports

P. 6 x 6mm #6-32 Round Head Screws

Q. 8 x M5 Truss Head Bolts

R. 20 x 6mm Truss Head Bolts

S. 8 x M5 Nuts

T.  4 x Rubber Feet (Round / Clear)






Motherboard Specification
Processor Intel Gemini Lake 2.3Ghz Quad-core processor J4105 (14nm) with 4MiB Cache
RAM Memory Dual-channel Memory DDR4-PC19200 (2400MT/s) (not included) 2x Slots (up to 32Gb)
Graphics Intel UHD Graphics (Gen9.5) 600 (GT1) 700Mhz - 4K compliant
Storage Slot for M.2 NVMe SSD, Slot for eMMC Card (not included)
I/O Connectors (ODROID) HDMI-A x 1, USB 3.0 Host x 2, USB 2.0 Host x 1, PWM for Cooler Fan, UART for serial console 30Pin : GPIO/IRQ/SPI/ADC, 12Pin : GPIO/I2S/I2C
Network Ethernet RJ-45
Input Power 14-20V DC Power (not included)
Contents Of Box
Product Odroid H2
Power Adaptor 14-20V Power Adaptor (UK,EU,US available) - Optional
Additional accessories Heatsink, Case (4 types available)

Odroid-H2 Case 4 [77805]

  • Brand: Hard Kernel
  • Product Code: Odroid-H2 Case 4
  • Availability: In Stock
  • 17.99€

  • Ex Tax: 14.99€

Related Products

Odroid-H2 Case 3 [77804]

Odroid-H2 Case 3 [77804]

This “Case Type 3” is designed for the user who needs high a performance network machine, but with a..

17.99€ Ex Tax: 14.99€

Odroid-H2 Case 1 [77802]

Odroid-H2 Case 1 [77802]

This “Case Type 1” is designed for the user who needs high bandwidth network capability with high ca..

17.99€ Ex Tax: 14.99€

Odroid-H2 Case 2 [77803]

Odroid-H2 Case 2 [77803]

This “Case Type 2” is designed for the user who needs high a performance network machine, but with a..

10.79€ Ex Tax: 8.99€

Odroid-H2 Case 5 [77806]

Odroid-H2 Case 5 [77806]

This “Case Type 5” is designed for installation into any vehicle or ruggedised mounting environment...

60.00€ Ex Tax: 50.00€

Odroid-H2 Metal Case  [77807]

Odroid-H2 Metal Case [77807]

The ODROID H2 Metal Case is an aluminium case for the Odroid H2 board, and is designed for installat..

30.00€ Ex Tax: 25.00€