Product Compare (0)
Board for ODROID-GOThis is a spare replacement board for the ODROID-GO - useful for replacement part..
This 2x 20 Pin header socket is best used when plugging a shield on the ODROID-N2, such as the 3.5in..
Set of 10cm long jumper wires with DuPont connectors.Including:-- 40 x male to male- 40 x female to ..
10 pin Male Header for ODROID-GO - Pack of 5This is a spare part for ODROID-GO Kit.5pieces of 10pin ..
30pin GPIO Ribbon Cable for XU4It extends your GPIO port of ODROID-XU4.– Connector Pitch : 2.0mm– Ca..
12pin GPIO Ribbon Cable for XU4 It extends your GPIO port of ODROID-XU4.– Connector Pitch..
4 Channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V.This bi-directional logic l..
Allows for the step-up of the Voltage of an input source lower than 5V to be boosted up to 5V– Input..
30pin header socket and 12pin header socket are for the ODROID-XU4. It is useful when you make ..
Dual Stacking 30pin and 12pin Header ExtendersThese taller ODROID-XU4 and XU4Q GPIO pins give you an..
This is a perfect connector pack for various DIY projects with the ODROID-C0.You need a soldering sk..
Compatible with ODROID-C1+/C2/XU4System console interface board for platform development and debuggi..
CH340G breakout board, designed to allow the addition of a USB connection to your project.This modul..
This bridge board is used to supply separate 5V power to the ODROID-VU7 and VU7 Plus. When the compu..
for ODROID-C1/C1+/C2You're probably itching to make some fun embedded computer projects with ODROID-..
Showing 1 to 16 of 16 (1 Pages)