for ODROID-C1/C1+/C2

You're probably itching to make some fun embedded computer projects with ODROID-C1/C1+/C2. What you need is an add on prototyping T-breakout board, which can break out all those tasty power, GPIO, I2C, ADC pins from the 40 pin header onto a solderless breadboard. This set will make "cobbling together" prototypes with the ODROID-C1/C1+/C2 super easy. 

This kit comes with below many items.

- Assembled T-breakout PCB -  40Pin GPIO Breakout board
- Breadboard - 630 Tie-points with dual power lanes
- 40pin Ribbon cable - IDC Flat cable 100mm
- 40pin Male-to-Male Dupont jumper Wire 170mm
- 7 x Green LED 3mm
- 7 x Yellow LED 3mm
- 7 x Red LED 3mm
- 2 x Photo Cell (CdS Light sensor)
- 6 x Tact Swithc
- 50 x 330 Ohm 1/6W resister
- 50 x 10K Ohm 1/6W resister

Odroid Tinkering Kit for ODroid-C1/C1+/C2 [77777]

  • Brand: Hard Kernel
  • Product Code: Odroid C1 Tinkering Kit for C1+/C2
  • Availability: In Stock
  • 23.99€

  • Ex Tax: 19.99€

Related Products

Odroid C1+ [77100]

Odroid C1+ [77100]

Based on the classic ODROID C1 with Amlogic S805 processor, 1GB RAM, and an eMMC socket, the Odroid ..

47.99€ Ex Tax: 39.99€

Odroid C0 - Multicore Headerless Prototyping Computer [77110]

Odroid C0 - Multicore Headerless Prototyping Computer [77110]

The ODROID-C0 is a computer for those who wish to make a more flexible and portable applications. It..

35.99€ Ex Tax: 29.99€

Odroid C2 - 64-bit quad-core Single Board Computer [77200]

Odroid C2 - 64-bit quad-core Single Board Computer [77200]

The ODROID-C2 has many advantages over the Raspberry Pi3. The processor is an S905 ARM-64bit 1.5GHz ..

59.99€ Ex Tax: 49.99€