Cases, Buttons and Speaker Kit for ODROID-GO


 This is a spare mechanical parts pack for ODROID-GO Kit.


PACKAGE INCLUDE
 

B. 1x Front enclosure 
C. 1x Back enclosure 
E. 1x 4 button rubber 
F. 1x 2 button rubber 
G. 2x 2 button rubber 
H. 1x 8Ohm 0.5W speaker 
J. 10x screws 
K. 1x LCD window 
L. 1x button set


Once you have assembled the ODROID-GO, you can download and install the games of yesteryear to play - comfortable in the knowledge that they're on a device you built for yourself!




ASSEMBLY INSTRUCTIONS


This section shows you how you can build the ODROID-GO. Please carefully follow the instruction below.


LCD window

First, in order to protect LCD screen, you have to place the enclosed plastic screen cover on the front enclosure. Please completely remove the sticker on the back of the screen cover and carefully place it on the front enclosure.

   


LCD screen

Second, you need to attach the 2.4” LCD screen to the front enclosure. Please note that you must remove the vinyl cover on the LCD screen before placing LCD module in the front enclosure. Also, you would need to slightly wipe or blow out the window cover or LCD screen in order to remove any dust or fingerprints.

  

Play buttons

Third, place the play buttons in the front enclosure. You need to cut and remove the plastic buttons (an arrow key piece, buttons 'A' and 'B') from the plastic button set enclosed, and then put the rubber pieces on top of the plastic keys.


 


Main board

Next is the main part of the assembling instructions. Please carefully put the ODROID-GO board in the front enclosure and connect the LCD cable to the board. After the LCD screen cable is firmly connected, you can fasten the main board with the screws (3x) enclosed.

  


You also need to connect the battery pack and speaker module to the ODROID-GO board. It would be a good idea to wrap the speaker wires as shown in the picture, otherwise, it would be difficult to close the back enclosure.


   

Power key

Another piece which you have to cut on the plastic button set is the power key, and you can place the power switch at the side of the ODROID-GO.

Close the back enclosure

Finally, you can close the back enclosure of the ODROID-GO with the screws (6x) enclosed. You can also try to turn on the ODROID-GO before closing the back enclosure.

Testing before playing

You can turn the device on or off with the power switch on the right side of the ODROID-GO. Please softly slide the key up to turn on or down to turn off.

Memory card

Since the ODROID-GO loads the games from the memory card (Micro SD type), you must insert a memory card in the card slot on the bottom of the ODROID-GO. In order to copy the game images to the memory card, please visit the link.

If the memory card is not inserted or fails for any reason, you will have an error screen when you turn on the ODROID-GO.

Cases, Buttons and Speaker kit for ODROID-GO [77902]

  • Brand: Hard Kernel
  • Product Code: Cases, buttons and a speaker kit for ODROID-GO
  • Availability: In Stock
  • 8.39€

  • Ex Tax: 6.99€

Related Products

Odroid XU4 -  including PSU [77400]

Odroid XU4 - including PSU [77400]

ODROID-XU4 is powered by ARM® big.LITTLE™ technology, the Heterogeneous Multi-Processing (HMP) solut..

76.79€ Ex Tax: 63.99€

Odroid XU4Q including PSU [77410]

Odroid XU4Q including PSU [77410]

ODROID-XU4Q is powered by ARM® big.LITTLE™ technology, the Heterogeneous Multi-Processing (HMP) solu..

76.79€ Ex Tax: 63.99€

Odroid-H2 Case 3 [77804]

Odroid-H2 Case 3 [77804]

This “Case Type 3” is designed for the user who needs high a performance network machine, but with a..

17.99€ Ex Tax: 14.99€

Odroid-H2 Case 4 [77805]

Odroid-H2 Case 4 [77805]

This “Case Type 4” is designed for the user who needs high a performance network machine, but with a..

17.99€ Ex Tax: 14.99€

Odroid-H2 Case 1 [77802]

Odroid-H2 Case 1 [77802]

This “Case Type 1” is designed for the user who needs high bandwidth network capability with high ca..

17.99€ Ex Tax: 14.99€

Odroid-H2 DC Cooling Fan w/ PWM, Speed Sensor (Tacho) [77818]

Odroid-H2 DC Cooling Fan w/ PWM, Speed Sensor (Tacho) [77818]

DC fan size : 92x92x25mmFan speed : 2000 rpm(Low frequency PWM controllable and tachometer signal le..

10.79€ Ex Tax: 8.99€

Odroid-H2 Case 5 [77806]

Odroid-H2 Case 5 [77806]

This “Case Type 5” is designed for installation into any vehicle or ruggedised mounting environment...

60.00€ Ex Tax: 50.00€

Odroid-H2 Metal Case  [77807]

Odroid-H2 Metal Case [77807]

The ODROID H2 Metal Case is an aluminium case for the Odroid H2 board, and is designed for installat..

30.00€ Ex Tax: 25.00€

Odroid XU4 **EMMC VERSION ONLY** + 8GB eMMC Card - including PSU [77400-2]

Odroid XU4 **EMMC VERSION ONLY** + 8GB eMMC Card - including PSU [77400-2]

ODROID-XU4 is a new generation of computing device with more powerful, more energy-efficient hardwar..

76.79€ Ex Tax: 63.99€